[Libosinfo] [PATCH] Add Slackware metadata
Christophe Fergeau
cfergeau at redhat.com
Thu Sep 11 17:19:09 UTC 2014
Hey,
Thanks a lot for all this data! A few comments below
On Thu, Sep 11, 2014 at 05:58:25PM +0200, ponce wrote:
> From: Matteo Bernardini <ponce at slackbuilds.org>
>
> Signed-off-by: Matteo Bernardini <ponce at slackbuilds.org>
> Reviewed-by: Robby Workman <rworkman at slackware.com>
> ---
> data/oses/Makefile.am | 1 +
> data/oses/slackware.xml.in | 166 +++++++++++++++++++++
> po/POTFILES.in | 1 +
> .../slackware-13.0-install-dvd.iso.txt | 33 ++++
> .../slackware64-13.0-install-dvd.iso.txt | 33 ++++
> .../slackware-13.1-install-dvd.iso.txt | 33 ++++
> .../slackware64-13.1-install-dvd.iso.txt | 33 ++++
> .../slackware-13.37-install-dvd.iso.txt | 33 ++++
> .../slackware64-13.37-install-dvd.iso.txt | 33 ++++
> .../slackware-14.0-install-dvd.iso.txt | 33 ++++
> .../slackware64-14.0-install-dvd.iso.txt | 33 ++++
> .../slackware-14.1-install-dvd.iso.txt | 33 ++++
> .../slackware64-14.1-install-dvd.iso.txt | 33 ++++
> test/test-isodetect.c | 7 +
> 14 files changed, 505 insertions(+)
> create mode 100644 data/oses/slackware.xml.in
> create mode 100644 test/isodata/slackware/slackware13.0/slackware-13.0-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware13.0/slackware64-13.0-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware13.1/slackware-13.1-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware13.1/slackware64-13.1-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware13.37/slackware-13.37-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware13.37/slackware64-13.37-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware14.0/slackware-14.0-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware14.0/slackware64-14.0-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware14.1/slackware-14.1-install-dvd.iso.txt
> create mode 100644 test/isodata/slackware/slackware14.1/slackware64-14.1-install-dvd.iso.txt
>
> diff --git a/data/oses/Makefile.am b/data/oses/Makefile.am
> index e1fb6fb..35769e2 100644
> --- a/data/oses/Makefile.am
> +++ b/data/oses/Makefile.am
> @@ -18,6 +18,7 @@ database_in_files = \
> opensuse.xml.in \
> rhl.xml.in \
> rhel.xml.in \
> + slackware.xml.in \
> solaris.xml.in \
> suse.xml.in \
> ubuntu.xml.in \
> diff --git a/data/oses/slackware.xml.in b/data/oses/slackware.xml.in
> new file mode 100644
> index 0000000..645d390
> --- /dev/null
> +++ b/data/oses/slackware.xml.in
> @@ -0,0 +1,166 @@
> +<libosinfo version="0.0.1">
> +
> + <os id="http://mirrors.slackware.com/slackware/slackware-13.0">
> + <short-id>slackware13.0</short-id>
> + <_name>Slackware 13.0</_name>
> + <version>13.0</version>
> + <_vendor>Slackware</_vendor>
> + <family>linux</family>
> + <distro>slackware</distro>
> + <release-date>2009-08-26</release-date>
> +
> + <media arch="i486">
i486 does not exist in data/schemas/libosinfo.rng which causes
test-xml-validate to fail (when running make check).
You could add the new value there, but I'm not sure how much existing
code hardcodes the known values already. Slackware binaries are exactly
i486 binaries ? They won't work on an i386 but an i686 is not required?
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware-13.0-iso/slackware-13.0-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 13.0 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/hugesmp.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + <media arch="x86_64">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware64-13.0-iso/slackware64-13.0-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 13.0 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/huge.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + </os>
> +
> + <os id="http://mirrors.slackware.com/slackware/slackware-13.1">
> + <short-id>slackware13.1</short-id>
> + <_name>Slackware 13.1</_name>
> + <version>13.1</version>
> + <_vendor>Slackware</_vendor>
> + <family>linux</family>
> + <distro>slackware</distro>
> + <upgrades id="http://mirrors.slackware.com/slackware/slackware-13.0"/>
> + <derives-from id="http://mirrors.slackware.com/slackware/slackware-13.0"/>
> + <release-date>2010-05-19</release-date>
> +
> + <media arch="i486">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware-13.1-iso/slackware-13.1-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 13.1 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/hugesmp.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + <media arch="x86_64">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware64-13.1-iso/slackware64-13.1-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 13.1 DVD</application-id>
All the 64 bit images starting with 13.1 seem to be using Slackware64
here. This is good as otherwise libosinfo would not be able to tell the
difference between a 32 or 64 bit image.
I would also add some information about the supported virtio devices,
but this can be added later.
The patches should be good to go once make check passes :)
Christophe
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/huge.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + </os>
> +
> + <os id="http://mirrors.slackware.com/slackware/slackware-13.37">
> + <short-id>slackware13.37</short-id>
> + <_name>Slackware 13.37</_name>
> + <version>13.37</version>
> + <_vendor>Slackware</_vendor>
> + <family>linux</family>
> + <distro>slackware</distro>
> + <upgrades id="http://mirrors.slackware.com/slackware/slackware-13.1"/>
> + <derives-from id="http://mirrors.slackware.com/slackware/slackware-13.1"/>
> + <release-date>2011-04-25</release-date>
> +
> + <media arch="i486">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware-13.37-iso/slackware-13.37-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 13.37 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/hugesmp.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + <media arch="x86_64">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware64-13.37-iso/slackware64-13.37-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 13.37 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/huge.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + </os>
> +
> + <os id="http://mirrors.slackware.com/slackware/slackware-14.0">
> + <short-id>slackware14.0</short-id>
> + <_name>Slackware 14.0</_name>
> + <version>14.0</version>
> + <_vendor>Slackware</_vendor>
> + <family>linux</family>
> + <distro>slackware</distro>
> + <upgrades id="http://mirrors.slackware.com/slackware/slackware-13.37"/>
> + <derives-from id="http://mirrors.slackware.com/slackware/slackware-13.37"/>
> + <release-date>2012-09-26</release-date>
> +
> + <media arch="i486">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware-14.0-iso/slackware-14.0-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 14.0 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/hugesmp.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + <media arch="x86_64">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware64-14.0-iso/slackware64-14.0-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 14.0 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/huge.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + </os>
> +
> + <os id="http://mirrors.slackware.com/slackware/slackware-14.1">
> + <short-id>slackware14.1</short-id>
> + <_name>Slackware 14.1</_name>
> + <version>14.1</version>
> + <_vendor>Slackware</_vendor>
> + <family>linux</family>
> + <distro>slackware</distro>
> + <upgrades id="http://mirrors.slackware.com/slackware/slackware-14.0"/>
> + <derives-from id="http://mirrors.slackware.com/slackware/slackware-14.0"/>
> + <release-date>2013-11-04</release-date>
> +
> + <media arch="i486">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware-14.1-iso/slackware-14.1-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 14.1 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/hugesmp.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + <media arch="x86_64">
> + <url>http://mirrors.slackware.com/slackware/slackware-iso/slackware64-14.1-iso/slackware64-14.1-install-dvd.iso</url>
> + <iso>
> + <volume-id>SlackDVD</volume-id>
> + <application-id>Slackware 14.1 DVD</application-id>
> + <publisher-id></publisher-id>
> + </iso>
> + <kernel>kernels/huge.s/bzImage</kernel>
> + <initrd>isolinux/initrd.img</initrd>
> + </media>
> + </os>
> +
> +</libosinfo>
> diff --git a/po/POTFILES.in b/po/POTFILES.in
> index a1a551f..7fb4aa2 100644
> --- a/po/POTFILES.in
> +++ b/po/POTFILES.in
> @@ -1,6 +1,7 @@
> data/oses/netware.xml.in
> data/oses/solaris.xml.in
> data/oses/dos.xml.in
> +data/oses/slackware.xml.in
> data/oses/mageia.xml.in
> data/oses/mandrake.xml.in
> data/oses/mandriva.xml.in
> diff --git a/test/isodata/slackware/slackware13.0/slackware-13.0-install-dvd.iso.txt b/test/isodata/slackware/slackware13.0/slackware-13.0-install-dvd.iso.txt
> new file mode 100644
> index 0000000..0402219
> --- /dev/null
> +++ b/test/isodata/slackware/slackware13.0/slackware-13.0-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware 13.0 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 1914167
> +El Torito VD version 1 found, boot catalog is in sector 2351
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 930 2352
> diff --git a/test/isodata/slackware/slackware13.0/slackware64-13.0-install-dvd.iso.txt b/test/isodata/slackware/slackware13.0/slackware64-13.0-install-dvd.iso.txt
> new file mode 100644
> index 0000000..ad1a4ec
> --- /dev/null
> +++ b/test/isodata/slackware/slackware13.0/slackware64-13.0-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware 13.0 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 1926212
> +El Torito VD version 1 found, boot catalog is in sector 2251
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 8CC 2252
> diff --git a/test/isodata/slackware/slackware13.1/slackware-13.1-install-dvd.iso.txt b/test/isodata/slackware/slackware13.1/slackware-13.1-install-dvd.iso.txt
> new file mode 100644
> index 0000000..ca1eca9
> --- /dev/null
> +++ b/test/isodata/slackware/slackware13.1/slackware-13.1-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware 13.1 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 2108672
> +El Torito VD version 1 found, boot catalog is in sector 2380
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 94D 2381
> diff --git a/test/isodata/slackware/slackware13.1/slackware64-13.1-install-dvd.iso.txt b/test/isodata/slackware/slackware13.1/slackware64-13.1-install-dvd.iso.txt
> new file mode 100644
> index 0000000..9126fdd
> --- /dev/null
> +++ b/test/isodata/slackware/slackware13.1/slackware64-13.1-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware64 13.1 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 2134723
> +El Torito VD version 1 found, boot catalog is in sector 2333
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 91E 2334
> diff --git a/test/isodata/slackware/slackware13.37/slackware-13.37-install-dvd.iso.txt b/test/isodata/slackware/slackware13.37/slackware-13.37-install-dvd.iso.txt
> new file mode 100644
> index 0000000..316b1c3
> --- /dev/null
> +++ b/test/isodata/slackware/slackware13.37/slackware-13.37-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware 13.37 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 2218788
> +El Torito VD version 1 found, boot catalog is in sector 2471
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 9A8 2472
> diff --git a/test/isodata/slackware/slackware13.37/slackware64-13.37-install-dvd.iso.txt b/test/isodata/slackware/slackware13.37/slackware64-13.37-install-dvd.iso.txt
> new file mode 100644
> index 0000000..e1fbdd6
> --- /dev/null
> +++ b/test/isodata/slackware/slackware13.37/slackware64-13.37-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware64 13.37 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 2254040
> +El Torito VD version 1 found, boot catalog is in sector 2424
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 979 2425
> diff --git a/test/isodata/slackware/slackware14.0/slackware-14.0-install-dvd.iso.txt b/test/isodata/slackware/slackware14.0/slackware-14.0-install-dvd.iso.txt
> new file mode 100644
> index 0000000..249b665
> --- /dev/null
> +++ b/test/isodata/slackware/slackware14.0/slackware-14.0-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware 14.0 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 1200676
> +El Torito VD version 1 found, boot catalog is in sector 681
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 2AA 682
> diff --git a/test/isodata/slackware/slackware14.0/slackware64-14.0-install-dvd.iso.txt b/test/isodata/slackware/slackware14.0/slackware64-14.0-install-dvd.iso.txt
> new file mode 100644
> index 0000000..6fd67cf
> --- /dev/null
> +++ b/test/isodata/slackware/slackware14.0/slackware64-14.0-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware64 14.0 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 1177016
> +El Torito VD version 1 found, boot catalog is in sector 664
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 299 665
> diff --git a/test/isodata/slackware/slackware14.1/slackware-14.1-install-dvd.iso.txt b/test/isodata/slackware/slackware14.1/slackware-14.1-install-dvd.iso.txt
> new file mode 100644
> index 0000000..0636efc
> --- /dev/null
> +++ b/test/isodata/slackware/slackware14.1/slackware-14.1-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware 14.1 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 1213132
> +El Torito VD version 1 found, boot catalog is in sector 709
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 2C6 710
> diff --git a/test/isodata/slackware/slackware14.1/slackware64-14.1-install-dvd.iso.txt b/test/isodata/slackware/slackware14.1/slackware64-14.1-install-dvd.iso.txt
> new file mode 100644
> index 0000000..3b8df93
> --- /dev/null
> +++ b/test/isodata/slackware/slackware14.1/slackware64-14.1-install-dvd.iso.txt
> @@ -0,0 +1,33 @@
> +CD-ROM is in ISO 9660 format
> +System id: LINUX
> +Volume id: SlackDVD
> +Volume set id:
> +Publisher id:
> +Data preparer id:
> +Application id: Slackware64 14.1 DVD
> +Copyright File id:
> +Abstract File id:
> +Bibliographic File id:
> +Volume set size is: 1
> +Volume set sequence number is: 1
> +Logical block size is: 2048
> +Volume size is: 1190715
> +El Torito VD version 1 found, boot catalog is in sector 698
> +
> +Joliet with UCS level 3 found.
> +SUSP signatures version 1 found
> +Rock Ridge signatures version 1 found
> +Rock Ridge id 'RRIP_1991A'
> +Eltorito validation header:
> + Hid 1
> + Arch 0 (x86)
> + ID ''
> + Cksum AA 55 OK
> + Key 55 AA
> + Eltorito defaultboot header:
> + Bootid 88 (bootable)
> + Boot media 0 (No Emulation Boot)
> + Load segment 0
> + Sys type 0
> + Nsect 4
> + Bootoff 58B 1419
> diff --git a/test/test-isodetect.c b/test/test-isodetect.c
> index 5bd211a..4288cf0 100644
> --- a/test/test-isodetect.c
> +++ b/test/test-isodetect.c
> @@ -408,6 +408,12 @@ START_TEST(test_mageia)
> }
> END_TEST
>
> +START_TEST(test_slackware)
> +{
> + test_one("slackware");
> +}
> +END_TEST
> +
> static Suite *
> list_suite(void)
> {
> @@ -424,6 +430,7 @@ list_suite(void)
> tcase_add_test(tc, test_opensuse);
> tcase_add_test(tc, test_centos);
> tcase_add_test(tc, test_gnome);
> + tcase_add_test(tc, test_slackware);
> tcase_add_test(tc, test_altlinux);
> tcase_add_test(tc, test_mageia);
> suite_add_tcase(s, tc);
> --
> 2.1.0
>
> _______________________________________________
> Libosinfo mailing list
> Libosinfo at redhat.com
> https://www.redhat.com/mailman/listinfo/libosinfo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/libosinfo/attachments/20140911/3d970109/attachment.sig>
More information about the Libosinfo
mailing list